Home
Safety Footwear Test Equipment
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Ankle Protection Materials Shock Absorption Capacity Tester H027
Overview
This machine is used to test the material system of the sole of sports shoes used in normal racing, and to determine its damping characteristics and fast compression force-displacement relationship.
Application
Ankle Protection Materials
Standards
SATRA TM142, ASTM F1976-2013, GB/T 24152-2018 (4.7), GB/T 30907-2014
Key Parameters
|
Model |
H027A |
H027B |
|
Impact head size |
The top r-angle radius is R=1.0±0.25mm, the top is circular |
The lower surface is hemispherical with a radius of curvature of 37.5±0.5mm |
|
Diameter 45 mm, weight less than 0.2 kg |
The bottom hemisphere is about 45mm in diameter |
|
|
Impact energy |
5±0.5J；7±0.5J |
5J |
|
Testing speed |
Each cycle is 2±1 seconds |
Each cycle is 2-3 seconds |
|
Impact way |
Free falling |
|
|
Load cell capacity |
5000lbf, sampling frequency greater than 1000HZ |
|
|
Displacement sensor |
0~100mm, sampling frequency greater than 1000Hz |
|
|
|
ASTM F1976-2013, GB/T 24152-2018 (4.7), GB/T 30907-2014. |
SATRA TM142 |
Product Details
Control panel
Sample test grip
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
