Home
Nonwoven Textile Tester
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Baby Adult Paper Diaper Permeability Tester Diaper Absorption Tester MB19
Overview
Diaper penetration tester Used to measure the penetration performance of diapers and diapers such as absorption rate, reosmosis and leakage.
Features
1, touch screen control, Chinese and English menu, man-machine dialogue mode, convenient operation.
2, built-in thermal printer, convenient on-site quick printing test results.
3, professional computer analysis software can achieve two-way operation with the computer.
4, high precision peristaltic pump, ensure the accuracy of penetrating liquid capacity.
5. Automatic filling and testing without manual filling.
6, electrode selection of special materials processing, good induction, electrode automatic positioning.
7, using stepper motor and high precision ball screw drive, accurate travel control.
8, automatic data processing, test average, standard deviation, coefficient of variation can be obtained.
9, built-in high-precision balance, after weighing directly calculate the amount of leakage and infiltration.
Application
Diaper
Diaper
Standards
GB/T 28004.1-2021 Diapers -- Part 1: Baby diapers
GB/T 28004.2-2021 Diapers -- Part 2: Adult diapers
Key Parameters
|
Model |
MB19 |
|
Accuracy of timing device |
0.01s |
|
Liquid filling device |
liquid filling volume deviation ±2mL, liquid filling flow rate: 200～800mL/min |
|
Scale accuracy |
0.01g, range 300g |
|
Electricity source |
AC220V 50Hz 100W |
|
Exterior size |
820×575×750mm |
|
Weight |
62kg |
Product Details
Liquid filling device
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
