- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
Infrared Laboratory High Temperature Sample Dye...
1.Dye and color experiment
2.Segmented, dyeing levelness, penetration test
3.Temperature-gradient dyeing
4.Acidity, temperature, bath ratio difference against The dye absorption rate test
5.Concentration and other tests
Textile Machine Mini Stenter - Horizontal Type ...
1.Digital display of temperature and time;
2.Settable temperature within room temperature~250℃;
3.Stainless steel SUS 304 construction with heat insulation layer;
4.Advanced motor drive system for delivering fabric samples;
5.Automatic temperature controlling system with the accuracy of ±1%;
24 Cups High Temperature Lab Dyeing Machine D011B
1. Whole machine in stainless steel material with strong and durable, high corrosion resistance advantage.
2. High performance programmable computer temperature control system, equipped with heating and cooling rate and accurate control of holding time.
3. Equipped with precision heating system, PT100 temperature control probe, available for edit and save 10 craft.
4. Drive system: Gear drive, small starting torque, smooth, light load, low noise.
5. Dye cups: 12 or 24 pieces, capacity 150㏄, 250㏄, 300㏄, 400㏄, 450㏄, 500㏄(Optional)
Laboratory Padder / Mangle Dyed Fabric Pressure...
1. The machine is all made of high-quality SUS304L mirror plate, which is firm and durable, clean and beautiful, and has a compact and reasonable structure.
2. The rubber roller is made of acid and alkali resistant imported NBR(nitrile rubber buna), with a length of 420mm, a diameter of 130mm and a hardness of 70 degrees Shore.
3. The speed is controlled with stepless frequency conversion, 0-25 RPM, 0-10 m/min.
4. The pressure of the roll is 0.05-0.6mpa, and the cylinder on both sides is a new large-section thin-film cylinder.
Sample Oscillation Dyeing Machine Dyestuff Test...
1. Whole machine in high quality mirror surface SUS 304 stainless steel materials. With the features of resistance to acid alkali corrosion, strong fouling resistance.
2. Working temperature controlled by advanced and reliable controlling computer.
3. Transmission system is in fast speed running but low noise advantage.
4. The adjustable speed driving motor achieves full and uniform swing for beakers plate.
5. Equipped with programmable computer temperature controlling system, can edit and save 10 crafts.