Home
Eyeglasses Test Equipment
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Eyeglass Frame Anti-Sweat Corrosion Test Chamber G006
Overview
The anti-sweat corrosion test chamber is a test apparatus designed according to the requirements of the National Standard GB/T 14214 General Requirements for Spectacle Frames and Test Method 5.8.2 of the People's Republic of China.
Application
Eyeglass lenses
Eyeglass lenses
Standards
GB/T 14214 General requirements and test methods for spectacle frames 5.8.2 Requirements
Key Parameters
1、Automatic timing, automatic stop in place, no need for human supervision.
2、Qingmi meter temperature control, automatic control of 55℃±5℃ test temperature.
3、The observation window adopts double layer tempered glass door, sealed tightly.
4、Special bracket: at least 3 pairs of glasses can be placed at the same time.
5、The inner cavity is made of alumina, with strong corrosion resistance and exquisite beauty.
6、Glass column container: diameter: (220±20)mm; height (100±10)mm, and can be covered; capacity bottle: 1L.
7, Specimen holder: glass or inert plastic material; so that the low part of the specimen from the anti-sweat liquid (10mm) liquid surface distance: 15mm ± 3mm
8, time: an experiment lasting ≥ 24h
Product Details
Control panel
Sample test
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
