Fabric And Garment Testing

1. Made of All aluminum alloy structure with stainless steel which is durable and beautiful.
2. Standard ASTM D3107.
3. Two independent test stands were used to test fabric elongation and fabric growth.
4. Special accessories for clothes rack, including clothes rack and clothes bar.
5, 6 stations, 3 fixed extensions and 3 fixed loads can be tested.

This instrument is suitable for measuring the bending length and bending stiffness of fabrics by means of inclined surface method.

1 Comply with multiple standards and measurement methods.
2 Rotary sample placement, speed adjustable.
3 Wind speed is adjustable. Adopts imported wind speed sensor calibration, speed accurate and stable.
4 High precision temperature and humidity sensor to get stable test data with high precision.
5 Available in color touch screen input parameters, calculation WVT, WVP, PV value.

Under standard atmosphere condition, use standard wrinkle device to add the predetermined load onto sample and keep for specified time. And then at the same atmosphere condition to adjust samples, compare it with reference photography to grade sample fabric’s appearance.

1.Manual clamp sample and replace nozzle.
2.Microprocessor processed, test results directly displayed.
3.Built-in continuous test mode, test units can be switched based on demands.
4.English touch screen menu operation, equipped with computer port.

1. Flow meter test mode, full capacity selection, high precision sensor dynamic measurement. 32 bits ARM high speed processor auto calculation, test results directly display.
2. Color touch screen display, test units switched freely and can be printed out directly.
 (cfm, cm3/ cm².s, m/s, L /d m².min, L/m².s, m3/ m².min, etc).
3. Multiple test area optional and can be recognized automatically.
4. Adopts imported fan, variable frequency motor control, low noise and high efficiency.
5. Automatically change pore plate to meet different measuring requirements.
6. Automatically finish sample clamping and loosen to reduce test area change due to manual clamping.
7. Provide continuous test mode to improve test efficiency.
8. Available to connect with computer, machine is controlled by professional test software.

1. Simple device, easy for operation.
2. The structure is in stainless steel materials.
3. Widely used in many kinds fabric.
4. It has good repeatability of the test result

1.Adopts high pressure pneumatic power and comes with various high steel cutting die, which provides the fast and convenient sample cutting preparation.
2.It can produce 800kg pressure at 100psi and has a safe double bond operation.Press die of special shape can be provided on request. Standard air compressor of laboratory is required.

The two ends of the specimen are fixed so that the specimen is bent continuously, so that the bending part of the specimen is subjected to a series of gentle friction.The abrasion condition of the specimen was observed visually to evaluate the shear and flexural friction resistance of the specimen.

This instrument uses solvent extraction method to extract the oil in the fiber. The principle is the same as the Soxhlet method. It uses ether or other solvents to extract the oil on the surface of the fiber, then evaporates the solvent, and then measures the oil content.

1. Adopting advanced mechanical design technology, manufacture technique and microcomputer controlling technology, it can collect data accurately. 
2. Using white background light and ultra-bright LCD, it can show test data clearly. 
3. According to the measurement of the viscosity of the liquid to choose the speed with the use of speed, meet the requirements of different range of measurement.

The same direction of the 2 pieces of sample cloth overlap with each other, into the instrument fixture and apply a certain load, with a certain speed and stroke reciprocating friction requirements of the number of times, observe the crack on the sample surface, damage or cloth and coating separation, in order to assess the sample rubbing resistance.