Home
Gloves & Socks Tester
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Flame Testing Machine Glove Flame Retardant H123
Overview
Inflate the inside of the glove and test its internal air tightness.
Application
Protective gloves
Safety gloves
Standards
GB 28881-2012 A.2. 1, EN 374-2 6. 1
Key Parameters
|
Model |
H123 |
|
Burner |
Diameter 9.5 mm ± 0.5 mm. |
|
Sample specifications |
The second or third finger of a normal glove with a length of 60 mm to 70 mm. |
|
Flame heigh |
0-100 mm adjustable, standard test height 20 mm ± 2 mm. |
|
Ignition time |
0-99.9S , can be set by yourself, standard time is 10S . |
|
Spread time |
0-99.9S , can be set by yourself, the standard is 55S , automatic alarm will be triggered when the spread time is reached. |
|
Combustion gas source |
Methane, natural gas (combustion calorific value is 3 7MJ / m3 ) |
|
Equipment power supply |
220V 5 0HZ 200W |
Product Details
Sample test
Control Panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
