Footwear Testing Equipment

Friction coefficient refers to the ratio of tangential force to vertical force acting on the slide block. The coefficient of static friction is measured by the force required to move a slider at rest on a horizontal plane.

1.Body surface treatment: using American DuPont powder, electrostatic spray paint process, curing at high temperature 200 ℃ to ensure long-term color retention.
2.The mechanical parts are composed of non-corrosive structures and insulating materials;
3.It is equipped with standard stainless steel beads, which is not easy to rust;
4.Control circuit combination, independent research and development, high stability;
5.One-button automatic test, simple and convenient operation;
6.LCD display, breakdown alarm function;
7.Built-in insulation material to protect the operation edge and ensure the safety of misoperation;
8.Leakage current preset.
9.When the leakage current exceeds the preset current, it can automatically cut off the power and give an alarm.

1. The rising and falling of weights are controlled by pneumatic means, and the left and right movements are driven by motors.
2. Use special recording paper to record the test curve, precise friction coefficient grid lines, can not copy, scan, if copying will change the spacing between the grid lines, affecting the test results
3. Possess positioning device to reduce measurement error
4. The stylus has automatic shrinking and locking functions, and is controlled by a foot collapse switch
5. The recording pen and recording paper are easy to install and replace, and the test piece is easy to install

Take standard specimens, place on test plate, clamp it between the two plates of tester, take it out after the stipulated time, after release and cool the specimens, separately measure the central thickness of specimen and calculate its Compression resilience ratio.

The elasticity of elastomers when subjected to impact and vibration.

To test the impact resistance of safety shoes or protective shoes toe, bare steel head, plastic head, aluminum steel and other materials.

This instrument control pendulum up and down via electromagnet, under specified speed to strike the steel head of safety shoes, so as to inspect strike resistance strength of steel head of safety shoes. 

This machine is used to test the material system of the sole of sports shoes used in normal racing, and to determine its damping characteristics and fast compression force-displacement relationship.

1.Body surface treatment: using dupont powder, electrostatic spray painting process, curing at 200℃ to ensure that the color does not fade for a long time.
2.LED-SLD806 integrated display control box, menu operation mode. ;
3.One-click automatic test, easy and convenient operation;
4.With self-stop function, sample fracture stop;
5.Imported high precision bearings, low friction, high precision;

This machine is suitable for testing the quality of leather shoes and insole fibreboard of tourist shoes. Under certain conditions, the flexure index is calculated according to the number of flexure.

It can simultaneously test 6 groups of samples and display the test results separately, without affecting each other.

1.The test is conducted under minus 20-40 ℃, if conduct high temperature and low humidity, the lifetime of machine will be reduced to half.
2.Three flexing tests all need to run at about 100cpm, the machine is the heavy the better and stable.
3.The appearance of equipment will be baking varnished with beautiful appearance. 
4.Touch screen control panel for easy operation.

1.The test is conducted under minus 20-40 ℃, if conduct high temperature and low humidity, the lifetime of machine will be reduced to half.
2.Three flexing tests all need to run at about 100cpm, the machine is the heavy the better and stable.
3.The appearance of equipment will be baking varnished with beautiful appearance. 

1.The test is conducted under minus 20-40 ℃, if conduct high temperature and low humidity, the lifetime of machine will be reduced to half.
2.Three flexing tests all need to run at about 100cpm, the machine is the heavy the better and stable.
3.The appearance of equipment will be baking varnished with beautiful appearance. 
4.Touch screen control panel for easy operation.