Home
Eyeglasses Test Equipment
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Lab Equipment Eyeglass Lens Transmission Ratio Tester G001
Overview
It is used to measure parameters such as light transmission ratio, uniformity of light transmission ratio, and spectral transmission ratio of spectacle lenses.
Application
Eyeglass lenses
Eyeglass lenses
Standards
GB 10810.3 Specification and measurement method for transmission ratio of spectacle lenses and related spectacle products
EN ISO 12312-2015, ANSI Z 80.3-2018, AS/NZS 1067.1-2016
Key Parameters
|
Model |
G001 |
|
Measurement mode |
automatic test |
|
Spectral range |
280nm～780nm Accuracy：0.5um |
|
Transmission ratio range |
0～100% |
|
Working mode |
manual, automatic |
|
Transmission ratio accuracy |
≤ ± 1.5% (0 ~ 100%) |
|
Measurement light source |
LED |
|
Spectral resolution |
1.0nm |
|
Transmittance repeatability |
≤1% |
|
display accuracy |
0.1 |
Product Details
Touch screen
Press plate
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
