Home
Luggage and Suitcase Testing Equipment
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Lab Package Test Machine Free Fall Drop Impact Tester Luggage Drop Tester B004
Overview
This product is to simulate luggage/suitcase drops or gets impacts by hard object during transportation and evaluate its damage situation.
Available to set drop luggage’s surface, angle and edge tests.
Application
Luggage
Luggage
Standards
QB/T 2921-2007
Key Parameters
|
Model |
B004 |
|
Testing height |
40-180 cm |
|
Lifting and dropping speed |
0-300mm/min |
|
Single-wing area |
30 x 75cm |
|
Safety device |
Up and lower limit protective switch |
|
Maximum sample size |
750 x 750 mm |
|
Tray loading weight |
Approx. 100kg |
|
Dropping platform materials |
No. 45 steel, thickness 15mm |
|
Dropping platform size |
1200×1400mm |
|
Power supply |
Ac220V |
|
Machine Dimension (L x W x H) |
1200×1400×2250 mm |
|
Accessory |
Sand bag |
Product Details
Drop Platform
Control Panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
