Home
Luggage and Suitcase Testing Equipment
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Luggage Wheels Abrasion Tester Luggage Walking Wear Testing Equipment B005
Overview
To determine the resistance to abrasion and vibration during running for wheels and pull rod of luggage(with pull rod and attached with wheels), and whether the whole structure is damage or deformation.
Application
Luggage
Luggage
Standards
QB/T 2920 A method
Features
1.Automatic stop when sample drop during testing
2. Test data be saved automatically if outage
3.Adopt microprocessor control, LCD display
4.Driving adopts adjustable-speed motor to make test speed stable and accurate, so as to achieve stepless speed adjustment
5.Accurately display mileage value.
Key Parameters
|
Model |
B005 |
|
Testing wheels rotary speed |
0.5- 6km/h |
|
Mileage range |
0-99.99km |
|
Testing wheels diameter |
Diameter (216+/-2) mm, Cement sand structure |
|
Impact block size |
1000 x 30 x 3mm |
|
Pull rod horizontal angle |
45 Degree +/- 2 degree, movement type |
|
Dimension |
1240 x 1600 x 1380 mm |
|
Power supply |
AC 220V 50HZ |
Product Details
Roller
Control Panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
