Home
Plastic Testing Equipment
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Plastic Digital Display Tensile Impact Testing Machine HP07
Overview
Digital display tensile impact testing machine is mainly used for the determination of impact toughness of hard plastic, reinforced nylon, glass fiber reinforced plastics, ceramics, cast stone, electrical insulation materials and other non-metallic materials. Is the chemical industry, scientific research units, colleges and universities, quality testing departments such as the ideal test equipment.
Features
1. High-precision intelligent controller, equipped with liquid crystal display, can read data intuitively and accurately
2. China's first use of carbon fiber pendulum rod (patented), in the direction of impact, improve the rigidity of the material, and the impact mass is concentrated in the center of mass of the pendulum, truly achieve no vibration impact test, and increase the service life.
3. Imported high resolution digital encoder is adopted for higher and more stable Angle test accuracy
4. According to the principle of aerodynamics, the impact hammer and imported ball bearing greatly reduce the friction loss caused by machinery
5. Automatic calculation of the final result, the test data can save 12 sets of data and calculate the average value
6. You can choose Chinese and English operation interface, test results can choose J/m, KJ / ㎡, kg - cm/cm, ft - ib/in etc
7. Built-in micro printer to print test data
Application
Plastic
Rubber
Wire
Standards
ISO179—2000, GB/T13525-92, ISO8256-1990, JB/T8762, ASTM D-1822
Key Specifications
|
Model |
HP07-1 |
HP07-2 |
|
The pendulum energy |
5J |
7.5J, 15J, 25J, 50J |
|
The distance from the center of the pendulum to the center of the sample |
230mm |
395mm |
|
Display mode |
Color touch screen (Chinese and English) |
|
|
The Angle sensor brand and its accuracy |
Imported from omron encoder, precision to 0.01 ° |
|
|
Energy display accuracy |
0.01j |
|
|
Impact speed |
2.9m/s |
|
|
Pendulum Yang Angle |
150 ° |
|
|
Supporting distance of clamping jaw |
20-30mm |
|
|
Quality of t-head |
15 or 30g |
|
|
Preelevation of the pendulum |
150° |
|
|
Impact velocity |
2.9 m/s |
|
Product Details
Jaw and Pendulum
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
