Home
Textile Testing Equipment
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Pneumatic Electronic Single Fiber Strength Tester
Overview
It is used to measure the breaking strength, breaking elongation, constant elongation load, constant load elongation, creep and other performance indexes of various materials such as single fiber, metal wire, hair and carbon fiber.
Application
CARBON FIBER
HAIR
METAL WIRE
SINGLE FIBER
Standards
GB/T14337, 9997, 13835.5, ISO 5079, 11566, ASTM D 3822, BS 4029
Key Parameters
| Model | F003C |
| Clamp | Manual Grips |
| Range | 1000cN, indexing value: 0.01cN |
| Force measurement accuracy | 0.2%F·S |
| Speed range | 2 ~ 200mm/min (set freely within the range) |
| Effective range | 200mm |
| Elongation resolution | 0.01mm |
| Minimum clamping distance | 0.1mm |
| Clamping distance positioning | digital setting, automatic positioning |
| Unit conversion | N, cN, Kgf, mm, lb, in |
| Working power | AC220V/50Hz power: 120W |
| Extemal Dimensions | 500 x 400 x 600mm |
| Weight | 25kg |
Product Details
gas supply connector
microprinter
sample grips
serial port
Switch
tension clip
touch screen
weight
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Set parameters
Set appropriate parameters according to test requirements.
Reset
After entering the experimental interface, press the reset button first to reset the lower clamp.
Prepare samples
Clamp the prepared sample with the specified tension clamp, clamp one end, and then hold the other end with your hands to let it fall freely.
Clamp the sample
Place the sample in the middle of the clamp and press the upper clamp key to clamp the sample.
Start test
When the sample is ready, press the start button to start the experiment.
Test results
After the experiment is completed, the experimental results are displayed, and the instrument and lower fixture will be automatically reset.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
