Products

Used for test the apparent opening size for a single layer geotextile or geotextile-related products, under the wet-sieving principle.

The flow rate (MM/S), which is perpendicular to the plane flowing by the plane of the gear fabric under the hydraulic gradient of the unit.

1, By the large screen color touch screen separate control test, can also be used for computer control test, the computer can display real-time differential pressure - dynamic curve;
2, The use of high-precision imported micro pressure differential sensor, accurate measurement results, good repeatability;
3, Fully realize the automatic measurement, the sample to the specified position, the instrument automatically find the appropriate measurement range, automatic adjustment, accurate measurement.
4, Pneumatic clamping sample, fully meet the clamping requirements of various materials;
5, The use of long arm clamping handle, can measure large samples, and do not have to cut large samples small, greatly improve the work efficiency;

It is used for the determination of the thickness of geosynthetics and related products under different pressures and specified times, and supports a large range of tests with a maximum thickness of 40mm.

Used for testing the abrasion resistance of geotechnical materials.

En la muestra de geomembrana de superficie rugosa, utilice un medidor de profundidad para medir la diferencia de altura entre la parte convexa (pico) y la parte cóncava (valle) de la superficie de la película, y tome el valor promedio de los valores medidos de todos los puntos efectivos. en la dirección del ancho de la muestra como superficie rugosa. Altura de rugosidad de la superficie de la geomembrana.

1 Color touch screen control, human-computer dialogue mode, easy to operate.
2 Six-unit design, 5 workstations in each unit, high testing efficiency.
3 The six units can be tested separately and operation is simple. Built-in water circulation makes the temperature in the bath uniform and no big fluctuation.
4 Each workstation is equipped with a separate photoelectric switch to automatically determine the pause and record the pause time.
5 The temperature control adopts PID algorithm with small fluctuation, which effectively avoids over-temperature.
6 The instrument has a water level sensor for automatic monitoring to avoid dry burns caused by the absence of water.

This instrument is suitable for measuring the effective pore diameter of all types of geotextile products, and its performance meets the requirements of the national standard GB/T14799-2005, "Measurement of effective pore diameter of geotextiles and related products - dry sieving method" JTE-50. Principle: Take the sample of single-layer geotextile and its related products without tension as the sieve, under the specified vibration frequency and amplitude, conduct tests on the sample and graded granular materials to calculate the sieving rate.

Flow velocity of water flowing perpendicular to the plane of the geotextile under a unit hydraulic gradient (mm/s)

The sample is placed on the test platform, with the pressure foot parallel to the platform. A specific pressure is applied to a specific area of the sample. After a specified time, the vertical distance between the two plates is measured and read, which is the measured value of the sample thickness.

1) This instrument adopts lifting form with stepper motor, direct pressurization, automatic synchronization and dial indicator reading. It can be carried out under normal laboratory conditions.
2) The thickness can be measured continuously or one time, and the weighing time can be set to avoid human error in manual measurement.
3) The presser foot transmission device works stably; the distance between the center of the presser foot and the side of the column is large, which can meet the thickness measurement requirements on large pieces of fabric without cutting and sampling separately.
4) The space around the test platform of this instrument is large, so it is not necessary to cut the sample during measurement.
5) This instrument uses a color touch screen for control. The test run only requires one key to complete. The data can be read, queried and printed automatically.

1.Control Panel Function: Yarn color card winding machines are usually equipped with a control panel to facilitate the user to set the winding speed, winding width, winding density and number of layers to ensure the uniformity of the sample cards.
2.Pre-tensioning device: The machine is equipped with a tensioner to apply pre-tension to the yarn to prevent the sample card from slipping or deforming during the winding process.