Safety Footwear Test Equipment

1. Molten Metal Splash Tester consists of a control box, a test stand and a crucible.
2. The test stand is equipped with an automatic flipping device, and the flipping speed and angle are controlled by a motor.
3. The specimen installation angle is adjustable.
4. Equipped with an adjustment device and a ruler, you can easily and accurately adjust the pouring height.
5. Equipped with a clamp to facilitate grabbing, moving and installing the crucible.
6. The bottom of the test stand is equipped with a splash metal collection device.
7. PLC touch screen operation control.
8. Different standards have different configurations, so the actual configuration shall prevail.

1. The radiation heat source consists of 6 groups of silicon carbon heating tubes.
2. The main components include radiation heat source, sample holder and mounting plate, sample clamping plate, copper calorimeter, calorimeter mounting module, recorder, etc.
3. The intensity of the radiant heat source can be adjusted automatically.
4.  The  software  automatically  records  relevant  test  data  and  automatically  calculates  the radiant heat transfer index ( RHTI )

UTS International Co., LTD
2/F, #043 Cangxi, Nanjing County, Zhangzhou City of Fujian PR, 363601, China. Tel: +86 596 7686 689    Email: hello@utstesters.com
Website: www.utstesters.com

5. Automatically open and close the protective grid to control the heat received and shielded by the experiment.
6. The thermal radiation flux display meter displays the heat flux value in real time.
7. Special testing software to automatically conduct relevant experiments and data processing and analysis.
8. Water cooling ensures safe operation of the equipment.
9. Equipped with a weight device, which can be used to apply a standard gravity of 2N to the sample .
10. Different standards have different configurations, so the actual configuration shall prevail.

1. Shock Acceleration Tester panel is made of imported special aluminum, with beautiful appearance and easy cleaning;
2. It adopts precision guide rails, with long service life, low noise and small vibration;
3.  The  surface  of  the  instrument  is  treated  with  electrostatic  spraying  technology,  which  is beautiful and easy to clean;
4. The special aluminum panel has clear writing and is not easy to wear. The imported metal buttons are sensitive and not easy to damage;
5. The instrument adopts a vertical structure design, which is stable, runs smoothly and has low noise;
6. The instrument is equipped with a precision level detection device;
7. It adopts high-precision, fast-response quartz force sensor;
8. Color touch screen display control, menu-based operation mode, convenient and simple;
9. Standard modular design, convenient for instrument maintenance and upgrade.

1. The machine has two clamps, which can be used to make two samples at the same time.
2. The machine has automatic stop function. When the set number of times arrives, the machine will stop automatically.
3. The machine has the function of manual adjustment and reset.
4. The machine is equipped with a protective cover to prevent the test piece from flying out at high speed and harming the operator.

Ceramic tile anti-slip testing machine is a test instrument for measuring the anti-slip performance of ceramic tile.

Friction coefficient refers to the ratio of tangential force to vertical force acting on the slide block. The coefficient of static friction is measured by the force required to move a slider at rest on a horizontal plane.

1.Body surface treatment: using American DuPont powder, electrostatic spray paint process, curing at high temperature 200 ℃ to ensure long-term color retention.
2.The mechanical parts are composed of non-corrosive structures and insulating materials;
3.It is equipped with standard stainless steel beads, which is not easy to rust;
4.Control circuit combination, independent research and development, high stability;
5.One-button automatic test, simple and convenient operation;
6.LCD display, breakdown alarm function;
7.Built-in insulation material to protect the operation edge and ensure the safety of misoperation;
8.Leakage current preset.
9.When the leakage current exceeds the preset current, it can automatically cut off the power and give an alarm.

The elasticity of elastomers when subjected to impact and vibration.

To test the impact resistance of safety shoes or protective shoes toe, bare steel head, plastic head, aluminum steel and other materials.

This instrument control pendulum up and down via electromagnet, under specified speed to strike the steel head of safety shoes, so as to inspect strike resistance strength of steel head of safety shoes. 

This machine is used to test the material system of the sole of sports shoes used in normal racing, and to determine its damping characteristics and fast compression force-displacement relationship.

1.Body surface treatment: using dupont powder, electrostatic spray painting process, curing at 200℃ to ensure that the color does not fade for a long time.
2.LED-SLD806 integrated display control box, menu operation mode. ;
3.One-click automatic test, easy and convenient operation;
4.With self-stop function, sample fracture stop;
5.Imported high precision bearings, low friction, high precision;

The test shoes are loaded with steel balls, a temperature probe is inserted into the insole of the shoes, and then the shoes are sealed with heating insulation sleeve, and placed in a cryogenic box to observe the temperature change in the sole and determine the insulation situation.