Home
Carpet Testing Machine
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Lab Equipment Carpet Flammability Tester MC02
Overview
Carpet Flammability Tester is suitable for testing the flammability and flame retardant performance of carpet under small flame. The Carpet Flammability Tester complies with hot metal nut test(BS 4790) and the methenamine tablet test. Carpet Flammability Tester complies with ISO 6925, BS 6307, etc.
Application
Carpet Flammability tester is used to test the effects of a small source of ignition on floorcoverings. Carpet flammability tester can be used for either Hot metal nut test (BS 4790) and Methenamine tablet test (ISO 6925, BS 6307 and GB/T 11049)
Carpet burn tester Test methods (Hot metal nut method, BS 4790)
The stainless steel nut is heated to 900¡æ in a muffle furnace, place specimen on the bottom of the test chamber and the clamping ring is placed on the specimen, use crucible tongs to place the heated nut in the center of the ring, remove the nut in 30s and a measurement of spreading of the ignition on the sample is made to evaluate the flammability of carpet.
Carpet Flammability tester Test methods (Methenamine tablet method, ISO 6925, BS 6307)
Place the conditioned specimen on the removable base inside the test chamber and the metal plate with a circular cut-out is placed on the specimen, the tablet is placed at the centre of the specimen and ignited. After the flame has extinguished, measurements are made to assess the effect on the carpet.
Application
Carpet
Carpet
Carpet
Standards
BS 4790 BS 6307 ISO 6925 CFR 1630
CFR 1631 GB/T 11049 CPAI 84 CGSB standard 4-GP-2
Key Specifications
|
Model |
MC02 |
|
Test Chamber |
30 x 30 x 30cm |
|
Square metal platen |
230x230mm, thickness 6.5±0.5mm, Inner diameter 205mm |
|
Fireproof board thickness |
≥6mm |
|
Dimension ( L x W x H ) |
57x26x37cm(WxDxH) |
|
Weight |
≈28Kg |
Product Details
Steel ring
Fixture
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
