Home
Whole Shoe Testing Equipment
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Lab Equipment Low Temperature Flexing Tester H017F
Overview
Low temperature cold machine dedicated to testing the finished shoes, rubber, sole, synthetic leather, plastic shoes such as simulation of low temperature environment test in order to understand the demands of all kinds of materials or finished shoes to adapt to the cold climate or cold terrain area of the ability of the instrument are all made of SUS rust steel quality, can be equipped with a variety of different test fixture device, in order to achieve the different requirements of various test standard. Determine material resistance to cracking or other types of failure at bending creases.This method is applicable to all flexible materials, especially leather, coated fabrics and textiles for uppers.
Application
shoes
shoes
shoes
Standards
SATRA TM55, SATRA TM60, ASTM D1052
ISO 17694 (6.4), ISO 4643 (5.5), ISO 4643 (5.6)
Key Parameters
|
ROSS whole bottom sole/sample sheet fixture set |
|
|
The winding Angle |
90 ° |
|
Grips station quantity |
2sets( 4pcs sample test in one time) |
|
Flexing speed |
60cpm |
|
Sample size |
150 x 25mm |
|
Bally flexing fixture set |
|
|
The specimen size |
70 x 45 ㎜ |
|
The winding Angle |
22.5 ° |
|
Number of test pieces |
6sets |
|
Flexing speed |
100±3cpm |
|
Upper flexing fixture set |
|
|
Upper flexing fixture |
4sets |
|
Flexing speed |
300cpm |
|
Low temperature chamber parameters |
|
|
Inside Chamber capacity |
150L |
|
Temperature range |
-40~100 ℃ |
|
Temperature accuracy |
±2° |
|
Time range |
Touch screen 0-999,999.(adjustment) |
|
Material |
SUS 304 stainless steel and painted |
|
Control system |
Programmable Microprocessor Control |
|
power |
1$AC220V 50/60HZ |
|
Weight |
320kg.
|
Product Details
Control panel
Sample test grip
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
