Safety Footwear Test Equipment

Products Categories

Luggage Magnetic Buckle Fatigue Testi...

Luggage Buckle Durability Testing Mac...

Luggage Handle Durability Tester Lugg...

Luggage Wheels Abrasion Tester Luggag...

Lab Package Test Machine Free Fall Dr...

Luggage Comprehensive Function Tester...

Luggage Vibration Impact Tester B002

Mileage Tester for Luggage Wheels Whe...

Fur Friction Color Removal Tester Col...

High Accurity Laboratory Equipment PH...

0102030405

Textile Lab Equipment Shock Acceleration Tester H117

1. Shock Acceleration Tester panel is made of imported special aluminum, with beautiful appearance and easy cleaning;
2. It adopts precision guide rails, with long service life, low noise and small vibration;
3. The surface of the instrument is treated with electrostatic spraying technology, which is beautiful and easy to clean;
4. The special aluminum panel has clear writing and is not easy to wear. The imported metal buttons are sensitive and not easy to damage;
5. The instrument adopts a vertical structure design, which is stable, runs smoothly and has low noise;
6. The instrument is equipped with a precision level detection device;
7. It adopts high-precision, fast-response quartz force sensor;
8. Color touch screen display control, menu-based operation mode, convenient and simple;
9. Standard modular design, convenient for instrument maintenance and upgrade.

product details

Production Processes

Packing System

Overview

This machine is mainly used to measure the impact resistance of motorcycle rider's mechanical impact protective clothing, motorcycle rider's protective shoes, protective gloves and other samples.

Application

Safety Shoes

4ce8370a7132e52997a99ebe37e5a29a_8694a4c27d1ed21b0ef48fa78b37cac451da81cb9162

Safety Shoes

Protective gloves

Standards

ISO 20344 5.9 ; EN 12568:7.2.3

Key Parameters

Model

H117

Anvil (EN388)

Height :180mm±20mm

Diameter : φ100mm±2mm

Anvil spherical radius: SR100mm

Impact hammer (EN388)

Mass: 2500g±10g

Hammer diameter : φ80mm

Anvil (EN1621)	Height :190mm±20mm Diameter φ 100mm±2mm Anvil spherical radius: SR150mm±2mm
Impact hammer (EN1621)	Length: 160±2mm, top width: 50±1mm Cylindrical radius: R12.5±0. 1mm, Mass: 5000g±50g
Anvil (EN13634)	The thickness of the three boards: 25mm±0.5mm The height: ＞ 200mm The width of the middle board: 50mm± 1mm The spacing between the boards: 1 ±0.5mm. The radius of the top of the board: R12.5mm±0.5mm
Anvil (ISO20344)	Height: 175mm±25mm Diameter: φ50mm±2mm Anvil spherical radius: SR25mm±2mm
Impact hammer (ISO20344)	Mass: 5000g±50g
Quartz force sensor range	0～20kN, 0～200kN (replaceable) value limit is less than 1kN
Collection frequency	≥5kHz
Main unit dimensions	750mm ×740mm ×2100mm (L×W×H)
Control box dimensions	450mm400mm 1420mm (L×W×H)
Power supply	AC220V, 50Hz, 1000W
Weight	500Kg

Product Details

Control panel

Sample test

Production Processes

Process design and design and manufacture of specialized process equipment

Machining of components

Assembly of products

Comprehensive testing of machines

Scenarios of Use

Laboratory

Textile factory

Operation

Connecting the air supply

Connect the air supply to the instrument.

Add distilled water

Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.

Put in filte

Unscrew the screws and remove the top plate,Take away the reflector.

Put in filter.

Install the xenon lamp

Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.

Mount the sample

Mount the sample on the sample clamp.

BPT Sampling

Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.

Transportation

Packing System

1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.

2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.

3. Packing materials selected accorded with economic and safety requirements

4. Compliance with environmental requirements.