Home
Whole Shoe Testing Equipment
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Lab Equipment Sportshoes Shock Absorption Tester H126
Overview
It is used to verify the material used in the sole of the running shoes used in regular running sports and determine its shock absorption characteristics and rapid compression force-displacement relationship.
Application
Sportshoes
Standards
GB/T 30907-2014 "Test Method for Vibration Damping Performance of Rubber Shoes and Sports Shoes",
GB/T 38012-2019 "Test Method for Shock Absorption Performance of Complete Shoes"
HG/T 4806-2015 "Test Method for Compression Deformation of Rubber Shoe Soles"
GB/T 24152-2018 "Professional Basketball and Volleyball Sport Shoes", SATRA M142, etc.
Key Parameters
|
Model |
H126 |
|
Hammer weight |
8.5kg (5J), 11.9kg (7J) |
|
Impact head specifications |
the top R corner radius is R=1.0±0.25mm, the top is circular, the diameter is 45mm, and the weight is less than 0.2kg; the top R corner radius is R=37.5±0.25mm, the top is spherical |
|
Drop height |
50mm (adjustable) |
|
Impact mode |
free fall |
|
Impact energy |
5J:7J |
|
Test speed |
2S±1S |
|
Load per unit capacity |
5000N, sampling frequency greater than 1000Hz |
|
Displacement sensor |
0 ~ 100mm, sampling frequency greater than 1000Hz |
|
Power supply |
AC220V,50Hz |
Product Details
Control panel
Sample test
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
