Home
Geotextile Tester
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Laboratory Equipment Automatic Feather and Down Filling Power Tester MF01
Overview
To test the filling power of down feather and the products filling materials.
Features
1, Color touch screen display, man-machine dialogue, easy to operate.
2. Unique filter ventilation design, automatic switch between blowing and absorbing positions, to ensure that the feather will not fly around, to prevent harmful to the operator's health.
3. The test speed of the machine can be set, suitable for different standards, and the drive structure adopts servo motor system to make the height accuracy of the unevenness more accurate.
4. Original zero setting system to ensure the accuracy of data.
5. High precision sensor, arm32-bit microprocessor, 16-bit A/D acquisition level of AD company, precise induction of the position of the pressure plate, accurate calculation of test results, applicable to multiple standards.
6. Automatic wind speed design system ensures that the down is in a natural fluffy state, so that the data measured each time has a good authenticity and reproducibility.
7. The test process is completed with one key, and there is no need to manually replace the test bucket and take the time.
8. Fully automatic test, no need to replace the test bucket manually.
Application
filling materials
down feather
Standards
IDFB Part 10-B,
GB/T14272-2011,
FZ/T80001;
BSEN12130
Key Parameters
|
Model |
MF01 |
|
Measuring Accuracy |
0.1mm |
|
Measuring Height |
600mm or 750 mm |
|
Test Speed |
540mm/min, Settable |
|
Cylinder inner diameter |
Ф288 mm , Ф240 mm settable |
|
Option Accessories: Ф290 mm (JISL 1903, BS EN 12130, FZ/T 80001) |
|
|
Test Platen |
Standard Accessories: 94.25g: Ф284 mm or 68.4g :Ф 240 mm, settable |
|
Testing Platen diameter |
94.25g Dia. 284mm 68.4g Dia. 240mm 68.4g Dia. 282mm(Optional FZ/T80001) 120g Dia. 285mm(Optional JISL 1903)(settable) |
|
Sample mass |
00.1—99.9g, settable |
|
Blowing villus time |
1-999s, settable |
|
Compressing villus time |
1-999s, settable |
|
Printer |
Built-in printer |
|
Power Supply |
AC 220V±10% 50/60Hz 1100W |
|
Mainframe Dimensions (L×W×H) |
500(L)×550(W)×1200(H)mm |
|
Weight |
80kg |
Product Details
Test bucket
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
