Home
Feather & Down Tester
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Laboratory Equipment Dust Tester Down Products Dust Content Instrument MF18
Overview
Used for the content of down dust in down feathers and their products.
Instrument characteristics
1. The instrument uses a touch screen display, with a simple and easy-to-understand interface and easy operation.
2. Brushless fan speed regulation, low wind speed and temperature noise.
3. After the blowing is completed, the cover can be turned down automatically without manual operation.
4. Users can set the blowing time and resting time as needed.
Application
cold protective clothing
down
Standards
Standards
Key Specifications
|
Model |
MF18 |
|
Maximum wind speed at the air outlet |
9±1m/s |
|
Inner diameter of air outlet |
20±0.5mm |
|
Lower dust outlet area |
250×250±2mm 200 mesh (nylon) |
|
Upper dust cover area |
560×600±5mm 400 mesh (nylon) |
|
Lower experimental chamber box size |
300×300×300±2 mm, lower bottom arc design |
|
Overall dimensions |
1100×700×1350mm |
|
Weight |
90kg |
|
Power supply |
AC220V 50Hz 650W |
Product Details
Test chamber
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
