Home
Toys Testing Instrument
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Laboratory Equipment Plastic Film Thickness Tester T017B
Overview
It is suitable for precise thickness measurement of hard and soft materials such as thin films, composite films, paper, metal foil and hard sheets in the range of 2mm. Resolution of 0.1um, the leading domestic level, widely used in thin film, aluminum foil production enterprises, quality inspection agencies and other units.
Application
Film
Paper
Cardboard
Standards
EN-71-1 section 8.25; ASTM F963 section 8.21; ISO 8124-1 section 5.10; GB 6675-2 section 5.10; ISO 4593; ISO 4593, ISO 534, ISO 3034、GB/T 6672, GB/T 451.3, GB/T 6547, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702, BS 3983, BS 4817
Key Parameters
|
Model |
T017B |
|
Measuring range |
0-2mm (Other ranges can be customized) |
|
Resolution ratio |
0.1um |
|
Measuring speed |
10times/min(adjustable) |
|
Measuring pressure |
17.5±1kPa(film) 100±1kPa(paper) |
|
Contact area |
50mm²（film），200mm²（paper）Note: Film and paper are optional. |
|
Sampling step moment |
0 ~ 1300 mm(adjustable) |
|
Injection rate |
0 ~ 120 mm/s(adjustable) |
|
Working temperature |
15℃-50℃ |
|
Relative humidity |
Up to 80% without condensation |
|
Test environment |
No vibration, no electromagnetic interference |
|
Power supply |
220V 50Hz |
|
Dimensions |
450mm×340mm×390mm (L*W*H) |
|
Net weight |
23Kg |
Product Details
Sample test
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
