Home
Nonwoven Textile Tester
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Machine Constant Temperature Viscosity Tester ASTM D 3654 MB09
Overview
In accordance with GB 4851 (pressure-sensitive adhesive tape adhesion test method), the standard design and manufacture of adhesive force determination method of plaster, suitable for pressure-sensitive adhesive tape, self-adhesive, plaster, heat-soluble adhesive and other products for adhesion test test.
Application
Plaster
Self-Adhesive
Pressure-Sensitive Adhesive Tape
Heat-Soluble Adhesive
Standards
GB 4851 Test method for pressure sensitive adhesive tape adhesion
JIS Z 0237 Test method for pressure-sensitive adhesive tape and pressure-sensitive adhesive sheet
ASTM D 3654 Test method for shear adhesion of pressure-sensitive tapes
Key Parameters
|
Model |
MB09 |
|
The number of test groups |
10 groups |
|
Testing temperature |
Room temperature ~ 200℃, PID control |
|
Standard weight |
1000g±10g (including loading plate weight) |
|
Test steel plate |
50 (L) mm × 50 (B) mm × 1.5 (D) mm |
|
Heating mode |
hot air circulation |
|
Timer |
Automatic timer, 0 ~ 9999 hours, 59 minutes, 59 seconds can be switched |
|
Temperature display |
0.1 ℃ |
|
Safety devices |
With over-temperature and electric overload automatic power-off protection facilities |
|
The machine material |
Internal SUS304 # stainless steel plate, external steel plate baking paint treatment |
|
Size of the inner box |
460 × 340 × 450mm |
|
Electricity source |
AC220V 15A |
|
Outline size |
74×52×88cm |
|
Weight |
about 70kg |
Product Details
Test Chamber
Control Panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
