Gloves & Socks Tester

Products Categories

Luggage Magnetic Buckle Fatigue Testi...

Luggage Buckle Durability Testing Mac...

Luggage Handle Durability Tester Lugg...

Luggage Wheels Abrasion Tester Luggag...

Lab Package Test Machine Free Fall Dr...

Luggage Comprehensive Function Tester...

Luggage Vibration Impact Tester B002

Mileage Tester for Luggage Wheels Whe...

Fur Friction Color Removal Tester Col...

High Accurity Laboratory Equipment PH...

0102030405

Textile Machinery ISO20344 Glove Puncture Resistance Tester H106

1.Glove Puncture Resistance Tester Color PLC integrated display control box, menu operation mode;
2.Precision and high-end motor drive, stable operation and low noise;
3.Automatic positioning test, penetration stop function;
4.Special tungsten steel needle, standard fixed sample clamping fixture;

product details

Production Processes

Packing System

Overview

The glove puncture resistance testing machine takes a sample with a diameter greater than 40mm from the glove and installs it in the fixture of the machine. The puncture needle compresses and moves the sample at a speed of 100mm/min until the sample displacement reaches 50mm. Record the force The maximum value, evaluate the puncture resistance performance of its protective gloves;

Application

Protective gloves

Safety gloves

Standards

BS EN388-2016 "Protective gloves against mechanical hazards" clause 6.5

ISO20344-2004 "ISO20344 Personal Protective Equipment Footwear Test Method"

GB/T17622-2008 "Insulating gloves for live working"

AQ6102-2007 "Acid and Alkali Resistant Gloves"

GB24541-2009 "Hand Protection Mechanical Hazard Protective Gloves"

Key Parameters

Model	H106
Fixing fixture	Diameter 80mm, middle hole of upper and lower pressing plate 20±0.05mm, fixing screw M8;
Puncture needle	Diameter 4.5±0.05mm, front section tapered, taper 30±2°, tip radius 0.5±0.02mm.
Measuring range	0-2000N
Maximum stroke	100mm.
Puncture speed	0-500mm/min
Sample size	≥40mm
Manual/automatic function	Manual quick lifting/automatic reply function;
Test unit	N, LB, kg can be switched
Power supply	AC 220V, 10A.
Volume	580×160×430mm.
Weight	60kg.

Product Details

Sample test

Control Panel

Production Processes

Process design and design and manufacture of specialized process equipment

Machining of components

Assembly of products

Comprehensive testing of machines

Scenarios of Use

Laboratory

Textile factory

Operation

Connecting the air supply

Connect the air supply to the instrument.

Add distilled water

Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.

Put in filte

Unscrew the screws and remove the top plate,Take away the reflector.

Put in filter.

Install the xenon lamp

Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.

Mount the sample

Mount the sample on the sample clamp.

BPT Sampling

Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.

Transportation

Packing System

1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.

2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.

3. Packing materials selected accorded with economic and safety requirements

4. Compliance with environmental requirements.