Home
Plastic And Film Packaging Test Equipment
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Testing Equipment Manufacturers Elmendorf Tearing Tester P010
Overview
Designed for the tearing test of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textiles and nonwovens. It is the necessary testing instrument for the packaging,paper industries, quality inspections and quarantine labs.
Test principle
Using the principle of Ellemendorf method, the pendulum is raised to a certain height to make it have a certain potential energy; when the pendulum swings freely, the sample is torn by its own stored energy; the tearing is calculated by the computer control system. The energy expended when the sample is used to obtain the force required to tear the sample.
Application
Stretch Films
Paper
Textiles
Standards
ISO 6383-1-1983, ISO 6383-2-1983, ISO 1974, ASTM D1922, ASTM D1424, ASTM D689, TAPPI T414, GB/T 16578.2, GB/T 455.1, GB/T455.2, ASTM D295, D752, D1424, D1922, D5734, TAPPI T414, T496, BS 4253, 4468, CPPA D.9, DIN 53862, 53128, ISO 6383-2, EN 21974, SCAN P11
Key Parameters
|
Model |
P010 |
|
Pendulum Capacity |
200 gf, 400gf, 800gf, 1600 gf, 3200gf, 6400gf, |
|
Indication accuracy |
±1% |
|
Resolution |
1mN |
|
Sample Holder |
Pneumatic |
|
Pendulum Release |
Pneumatic |
|
Dimension |
470mm×340mm×530mm |
|
N.W. |
30kg |
|
Air Pressure |
0.6 Mpa(User-Supply) |
|
Temperature |
15℃-50℃ |
|
Relative Humidity |
No more than 70%，no dewdrop |
|
Power Supply |
220V 50Hz |
Product Details
Fixture
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
