Textile Testing Equipment

1. Burner pulse automatic ignition.
2. The burner is controlled by PLC touch screen, moves automatically, and resets automatically when the set time is reached.

3. The overall control system adopts PLC + touch screen control structure. All related operations can be completed through the touch screen.
4. The touch screen displays the test status in real time, such as pulse ignition status, motor status, solenoid valve status, etc.
5. The ignition time can be set by the touch screen, and the last set time will be automatically saved.
6. Configure the self-check function. If the equipment fails, the touch screen will automatically alarm and prompt the faulty device and phenomenon.

1. Oxygen and acetylene flow regulating devices can provide standard gas flow for welding nozzles.

UTS International Co., LTD
2/F, #043 Cangxi, Nanjing County, Zhangzhou City of Fujian PR, 363601, China. Tel: +86 596 7686 689    Email: hello@utstesters.com
Website: www.utstesters.com

2.  Oxygen  and  acetylene  pressure  regulating  devices  can  accurately  control  the  intake pressure to 250Kpa and 50Kpa.
3. Oxyacetylene welding torch is used to melt metal strips, and the welding nozzle diameter is ( 1.2±0. 1) mm.
4. Use a stepper motor to drive the metal strip, and the running speed of the metal strip can be set.
5. Melt drop guide mechanism, with high temperature anti-stick guide groove, the angle is 45 degrees.
6.  Fabric temperature sensor device, including refractory insulating rock wool support  block and armored platinum
Resistance, used to measure the temperature rise on the back of the specimen.
7. Counterweight copper hammer device, used to set fabric pre-tension 175g±0.5g .
8. Temperature rise data can be automatically recorded, and the number of molten drops can be recorded by the tester.
9. PLC touch screen operation control.
10. Different standards have different configurations, so the actual configuration shall prevail.

1. Color touch screen display operation, Chinese and English interface, menu-based operation mode.
2. The core control component uses STMicroelectronics' 32-bit single-chip microcomputer to form a multi-functional motherboard.
3. Precision pressure regulating valve.
4. The instrument has stable performance, accurate measurement accuracy, and is very conv enient, fast and reliable to operate;
5. The test box is made of 316 stainless steel
6. The instrument is equipped with a precision level detection device;

1.Color PLC integrated display control box, menu operation mode;
2.Precision and high-end motor drive, stable operation and low noise;
3.Automatic positioning test, penetration stop function;
4.Special tungsten steel needle, standard fixed sample clamping fixture;

Adopt high precision piezoelectric ceramic force sensor, high resolution, fast reaction, good repeatability, the machine controlled by computer, all test process is through computer controlled, automatic record impact force, automatic calculate average impact force, testing report also be available.

To test the density for Solid, liquid, powder and water absorbent material etc.

Clamp sample on the sample holder which placed onto machine, then put the rotary circular blade onto the sample. Switch on the machine and set to zero to start test. Blade will do reciprocating motion under the specified load and automatically counting. When the rotating blade penetrates the sample, machine will automatically stop. Compare the difference before and after test so as to get the test results.

Differential pressure method trace moisture tester, mainly used in chemical fiber, plastic industry polyester slice and nylon 6 particles in the melt spinning before, after drying treatment of trace moisture determination. The differential pressure method is fast, accurate, convenient, low cost and moderate price, especially suitable for factory enterprises.

1. The instrument uses a touchscreen microcomputer control system that displays test results in real time. The measurement range is 10Ω to 1014Ω. Test data can be automatically displayed on the touchscreen as a report, printed, saved to a USB flash drive, or connected to a computer for easy operation.
2. The instrument automatically adjusts the magnification based on the specific resistivity of the fiber being tested, eliminating the need for manual adjustment of the magnification switch.
3. The instrument automatically compresses the staple fibers in the measurement chamber, eliminating the need for manual cranking of the sample, making operation more convenient.
4. In addition to testing the specific resistivity of staple fibers, the instrument can also measure the specific resistivity of filament yarns with the addition of an add-on device.

In the analysis of raw cotton, cotton coils and chemical fibers containing impurity and various types of fiber (below 65mm) containing defects detection.

Used for testing breaking strength of cotton, chemical fiber and wool bundles.

1.Using electronic weighing, micro pressure sensor, large screen touch screen display in Chinese and English and microcomputer automatic control and data processing, with its own micro printer, can also be connected to the external parallel 24-bit pin printer.
2.Can display the value of Maclon, Maclon level. 
3.The machine has the function of weighing and automatic calibration of standard cotton sample, which improves the detection speed and accuracy.