Home
Plastic And Film Packaging Test Equipment
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Testing Instruments Coefficient of Friction Tester P008B
Overview
It is suitable for measuring static and dynamic friction coefficients of plastics film, sheet, paper, glass, rubber and other planar materials. It can also be used for measuring the smoothness of urethral catheter, cosmetics, eye drops and other materials.
Application
Stretch Films
Paper
Rubber
Glass
Standards
GB 10006, GB/T 17200, ISO 8295, ASTM D1894, TAPPI T816
Key Parameters
|
Model |
P008B |
|
Load range |
0-30N（6N Optional） |
|
Measurement accuracy |
0.5 level |
|
Trip |
70mm ,150mm(can be set) |
|
Slider weight |
200g, 500g（Customizable slider with different weight） |
|
Slider speed |
1-500 mm/min Speed can be adjusted arbitrarily |
|
Slider size |
63mm×63mm |
|
Outward Size |
490mm×320mm×220mm（L*W*H） |
|
Weight |
23kg |
|
Working temperature |
23±2℃ |
|
Relative humidity |
50±5%RH |
|
Power Supply |
1Phase AC 220V 50Hz |
Product Details
Test bench
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
