Home
Plastic And Film Packaging Test Equipment
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Testing Instruments Primary Adhesive Tester P018
Overview
Primary Adhesive Tester is used for initial adhesion test for stickers, labels, pressure sensitive tape, protective film, paste ointment, ointment Babu tack all kinds of sticky products.Primary Adhesive Tester with three-position design, greatly improving the test efficiency, the test angle 0-60°adjustable could meet different testing requirements, are widely used in the pharmaceutical industry, sticker manufacturer, quality inspection agency, drug testing and other institutions.Pressure-Sensitive Tapes, Adhesive Labels, Medical Adhesive Tapes, Adhesive Plasters, Cataplasma, Protection Films
Features
1.In full accordance with national standards , ensuring high accuracy test data.
2.Using the cant ball method of testing theory , easy to operate
3.Test tilt angle can be freely adjusted in accordance with the needs of users
4.Three-position design, higher test efficiency
Application
Adhesive Plasters
Medical Adhesive Tapes
Adhesive Labels
Pressure-Sensitive Tape
Standards
JIS Z0237,GB 4852
Key Parameters
|
Model |
P018 |
|
Angel Range |
0～60° |
|
Panel Width |
120mm |
|
Stations |
3 Stations |
|
Testable Area Width |
80mm |
|
Standard Ball |
1/32Inch～1Inch(Chinese Pharmacopoeia ball Optional) |
|
Dimension |
430mm×160mm×170mm |
|
Net Weight |
7kg |
|
Temperature |
15℃-50℃ |
|
Relative Humidity |
No more than80%，no dewdrop |
Product Details
Fixture
Control panel
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
