Home
Toys Testing Instrument
- Luggage and Suitcase Testing Equipment
- Colorimeter
- Carpet Testing Machine
- Eyeglasses Test Equipment
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Ttf Tensile Tester Used for Toys’ Destructive Tension Test T009
Overview
TTF Tensile tester is used to provide high and stable tensile force for tension test. It is mainly used for toys’ destructive tension test. Air compressor should be used to provide driving force.
Test Materials Range
1.Small ball parts on toys
2.Glued wooden toys
3.Airlock of aquatic toys and inflatable toys
4.Toys or toys parts made of expandable material
5.Buttons, eyes, decorative sheet and other things on the toys
6.Toys protrusion protector or projectiles impacted surface protector
7.All hard materials to cover on the face (such as goggles, space helmets or welding masks)
8.Mouthpiece of mouth actuated toys or other parts of toys intended to be placed on the mouth
9.Toys can be touched magnetism components, etc.
Application
Toys
Toys
Standards
ASTM F963 section 8.9;EN 71-1 section 8.4, 8.34;ISO 8124-1 section 5.24.6, 5.31;16CFR 1500 section 51, 52, 53;GB6675-2 section 5.24.6, 5.26
Key Parameters
|
Model |
T009 |
|
TTF test speed |
0.7±0.1in/sec |
|
Working air pressure |
60±10psi(4.2±0.7kgf/cm) |
|
Push-pull maximum range |
188 kgf |
|
Cylinder maximum stroke |
150mm |
|
Adjustable speed |
50-800mm/s |
|
Cylinder base plate stoke |
0-500mm |
|
Dimensions (L x W x H) |
1620 x 320 x 421 mm |
|
Weight |
48kg |
|
Optional accessories |
IMADA FB-200N Push-Pull Scale |
|
Stretching Jig |
Product Details
Sample holder
Cylinder
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
